Running Windows On The Mac

One thing I faced early on was installing Windows on my Mac. It is fairly straight forward process with the use of BootCamp. One of the requirements of BootCamp is an install of Windows XP with service pack II. Years ago a had purchased Windows XP for my home built PC, but service pack II was not part of it. So I needed to create a Windows Install CD with at least Service Pack II on it. I found some great instructions on how to Slipstream Windows XP Service Pack 3 to Create an Integrated XP Setup Disk with SP 3. Your gonna need that old PC or maybe a friends PC to do this.

If you already have a Windows Vista or Windows XP w/SP2 then your ready to go!

1. Under OSX launch Bootcamp Assistant (located in your utilities folder)

2. Create a partition for windows.

3. Install Windows

One thing: When setting up Windows during the install you need to make sure you format that partition as NTFS.

Once in Windows drop in your OSX install CD to install some drivers. Do your updates with apple and with Microsoft.

Booting between OSX and Windows is easy. Hold option key down during startup and select which to boot from. 

Blu-Ray Ripping Tutorial

Once you have read Blu-ray Ripping What You'll Need you can use this step by step tutorial to rip your Blu-Rays.



1. Use AnyDVD HD to rip the BD. After inserting the BD into your Blu-ray drive AnyDVD HD will take a moment to strip off any copy protections enabling you to backup the BD to your HD. At this point you can go into the AnyDVD HD program folder and launch AnyDVD Ripper and rip the BD to HD.

2. Use BDinfo and and load the "playlist" folder located in the BDVM folder. This will give you the correct playlist to load into our next step with TSmuxer. Find the appropreate playlist and make note of it. I just open a note pad file and save in in the same place as the movie files. Now we can get out of Windows.

3. On the Mac launch TSMuxer and load the playlist. Uncheck all the stuff you dont need. Presentation graphics, extra audio tracks/languages and sometimes even the non HD version of the movie.
One thing to note: The primary audio track of most BD are DTS-HD or TrueHD, currently it is best to 'downconvert' these to reg. DTS or AC3. Now select the file type and destination, save as m2ts. the resulting file will be between 14gb and 30gb depending on the movie length and current encoding.

Play the movie in Plex or XBMC. (Mac Mini 1.83ghz would be my suggested minimum for playback)

Wanna make the file sizes smaller or easier to playback on weaker systems? You'll need to re-encode. check out the rest blog for encoding video with Handbrake.

Bluray Ripping On The Mac: What You'll Need

For bluray disc reading I purchased an SATA LG GGC-H20L Bluray HD drive and put it in an Vantec NST-530s2 external USB2.o enclosure.

For actual ripping of the Bluray disc I had no other choice than to install Windows XP on my MacBook Pro using Bootcamp. I purchased a copy of AnyDVD HD for the actual ripping and then use TSmuxer for getting the main feature into one full quality .m2ts file. TSmuxer runs on Windows and Mac OSX.

I also use BDinfo (Windows only app) to find the correct playlist on the bluray to load into TSmuxer.

Once done you get a full quality rip from the bluray.

File sizes can range from 16GB - 30GB depending on the movie length and encoding.

You can use the full quality m2ts file or re-encode the file to something a little smaller.

Will discuss bitrate and picture size in future post.

My Mac Mini 1.83GHZ Core 2 Duo Home Theater

In my new search for full 1080p playback I decided to purchase a Mac Mini for my new setup. I ended up with a 1.83ghz model with a core 2 duo.

RAM:

 I decided to upgrade the ram to 4GB. This is a model 2,1 mac mini meaning it will see all 4GB but only use around 3,2gb of it. Unlike the earlier version of the 1.83ghz model 1,1 which would only see and use 2GB. I bought my ram from OWC, 4.0GB 2GB + 2GB set  I will post a video and links on how to open the Mac Mini up for upgrading the ram.

Hard Drive Storage:

The 5200 rmp 2.5" internal 80GB drive is not really the best for storing or even plying back 1080p video. As I already had a 1TB SATA hard drive from my recently dead PowerMac, I decided to pick an USB2.0/FW hard drive enclosure and put it in there. The NewerTech MiniStack was the enclosure I went with. Good reviews and seemed solidly built and functional. 

My Plasma TV:  

Is a Panasonic TH-42PZ80U and average 42" plasma TV and is mounted on my wall. Its a full 1080p HD TV with 3 HDMI ports (2 on back one on front)

HandBrake

This is the app that I've been using to convert my DVDs, or any video file into an AppleTV ready format. Personally I think this is the best and easiest app for DVD ripping/encoding for the Mac. (Not currently that great for HD conversions. Has trouble with Bluray ripps (.m2ts files) DTS audio tracks. Can NOT ripp a Bluray Disk either. Can however encode m2ts files with AC3 audio tracks.

HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows.

Supported sources:

Any DVD-like source: VIDEO_TS folder, DVD image or real DVD (unencrypted--protection methods including CSS are not supported internally and must be handled externally with third-party software and libraries), and some .VOB and .TS files. The VLC media player will take care of things there. It is used in conjunction with Handbrake.

File format: MP4, MKV, AVI or OGM
Video: MPEG-4, H.264, or Theora (1 or 2 passes or constant quantizer/rate encoding)
Audio: AAC, MP3, Vorbis or AC-3 pass-through (supports encoding of several audio tracks)

AppleTV

AppleTv is great for viewing 480p and even some 720p content. I started with an AppleTV back in October 2008. While home movies, 480p and 720p HD are perfectly suited for the AppleTV, 1080p content is not currently possible on the AppleTV. DVD playback from a connected Mac is not possible either. All DVD sources must be ripped and converted into .m4v format.

How I used my AppleTV:

I bought the lower end AppleTV with a 40GB harddrive, with no intention of actually storing anything on it. Instead I opted to use and old PowerMac G4 for use a "server" or shared library via itunes. This is a great way of working with the AppleTV.  No syncing needed in order to use the server. While you do need to have the AppleTV sync'd to a Mac, that Mac does not need any content on it. My AppleTV is actually sync'd with my personal computer, a MacBook Pro. I have it set to not sync anything. no photos, movies, tv shows... nothing.

What does this mean? Well you don't have to wait for your content to sync MBP iTunes to AppleTV. Large movies can take along time to transfer over wifi.

There are other ways to provide content for your AppleTV too, the server just worked best for me as I had a sort of old and unused computer lying around. You could even us a PC with Winblows (Windows) as a server. Windows XP would work just fine.

You could get an Airport Extreme and attach a USB Drive to store content on as-well. Or you could even by a 500GB or 1TB Time Capsule

I think the point here too, is that even if you get the 80GB AppleTV eventually you are going to need more storage. Within three months I accumulated over 350GB of video. So plan accordingly for future expansion.

DVDs:

So you have lots of movies on DVD but no way to play them. Well this was a must for me. I've got kids, 3 of them! DVD and kids don't mix! They throw them, they lick them, they scratch them and they stick them in places that DVDs just don't go... not to mention the DVD player itself, cards get put in there and anything else thin enough to get shoved in the tray. Anyway, having your DVDs ripped and converted into AppleTV ready files is the way to go. How do you go about doing this. Handbrake! Handbrake is a free software that allows you to ripp a DVD straight into an m4v file. Simple and easy. Nothing else to buy, no rocket science, just a bit of time to make the conversion. On the Mac side there is not better software, and it's free. 

You can get Handbrake here: Handbrake

Conclusion:

AppleTV actually does a-lot more than I have explained. From getting on the Web to view YouTube, view your Mobile Me content, Flicker, podcasts, movie trailers and itunes movie/TV  store. It's a fun and fairly easy to use Home Theater. The biggest drawback for me was you can't playback 1080p content on it. Compressed 720p @ 5mbs just didn't do it for me either.